Properties of polystyrene-poly(methylmethacrylate) random and diblock copolymers in dilute and semidilute solutions

Solution properties for random and diblock copolymers of polystyrene (PS) and poly(methyl methacrylate) (PMMA) have been measured by dynamic and total intensity light scattering in solvents of differing quality. The results are compared with the corresponding properties for PS and PMMA homopolymers of similar molecular weight, in order to determine if interactions between unlike monomers are significant. The hydrodynamic radius (R_h) and diffusion second virial coefficient (k_d) for the random copolymer are found to be larger than the corresponding values for the homopolymers in a solvent which is near-theta for the two homopolymers, whereas no such effect is observed for the block copolymer. This suggests that most intrachain interactions occur a relatively short distance along the chain backbone. In a mutual good solvent R_h and k_d of the random copolymer are comparable to the average of the values for the homopolymers, indicating that in a good solvent monomer/solvent interactions dominate over monomer/monomer interactions. For an isolated diblock copolymer in a mutual good solvent, there is no evidence that interactions between unlike monomers lead to additional expansion of the entire molecule, as measured by R_h, nor expansion of the individual blocks as probed by light scattering with one block optically masked. However, at low but finite concentration there is evidence (the coefficients of the binary interaction terms in the viscosity and the mutual diffusion coefficient, and the second and third virial coefficients) that a weak ordering effect may exist in block copolymer solutions, far from the conditions where microphase separation occurs. Finally, measurements of ternary polymer-polymer-solvent solutions show no dependence on monomer composition or monomer distribution for the tracer diffusion of probe PS-PMMA copolymers in a PMMA/toluene matrix. This indicate that the frictional interaction is largely unaffected by interactions between unlike monomers. However, there is evidence that the thermodynamic interaction is more unfavorable between a random copolymer and the homopolymer matrix than between a diblock and the matrix. © 1994 John Wiley & Sons, Inc.     

Polynomial-time approximation schemes for packing and piercing fat objects

We consider two problems: given a collection of n fat objects in a fixed dimension, (1) ( packing) find the maximum subcollection of pairwise disjoint objects, and (2) ( piercing) find the minimum point set that intersects every object. Recently, Erlebach, Jansen, and Seidel gave a polynomial-time approximation scheme (PTAS) for the packing problem, based on a shifted hierarchical subdivision method. Using shifted quadtrees, we describe a similar algorithm for packing but with a smaller time bound. Erlebach et al.'s algorithm requires polynomial space. We describe a different algorithm, based on geometric separators, that requires only linear space. This algorithm can also be applied to piercing, yielding the first PTAS for that problem.     

Domain size equilibration in sphere‐forming block copolymers

The kinetics of domain size equilibration were studied for asymmetric poly(ethylene‐alt‐propylene)‐b‐poly(dimethyl siloxane) (EPDMS) and polyisoprene‐b‐poly(dimethyl siloxane) (IDMS) block copolymers in the body‐centered cubic ordered phase. Small‐angle X‐ray scattering measurements of the principal peak position (q*) were made as a function of time after temperature jumps within the ordered state. The equilibration times were remarkably long, especially on cooling and for temperatures below 100 °C. For example, after a quench to 40 °C, q* for EPDMS had not fully equilibrated even after several weeks of annealing; IDMS required several days to equilibrate at the same temperature. In contrast, a lamella‐forming EPDMS sample was able to adjust q* within the timescale of the measurements (i.e., minutes) with both heating and cooling over the same temperature range. Measurements of tracer diffusion indicated that chain mobility was not the rate‐limiting step, although differences in mobility did account for the differences between EPDMS and IDMS. Rather, the limiting step was the required reduction in the number density of spheres on cooling; the disappearance of spheres, either by evaporation or by fusion, provided a large kinetic barrier. Lamellae, however, could adjust domain dimensions simply by local displacements of individual chains. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 715–724, 2003     

Complications of collagen injection of the vocal fold: report of several unusual cases and review of the literature

Injection laryngoplasty is one of the most frequently performed procedures in patients with voice complaints. Various biomaterials have been used to medialize vocal folds or to treat symptoms of vocal fold scar. The ideal biomaterial would be easily injected through a fine-gauge needle, well tolerated, and long lasting. Injectable collagen preparations fulfill at least two of these criteria, and collagen has been used widely for vocal fold injections. MATERIALS AND METHODS: We present a retrospective review of two unusual complications of collagen injection and a review of the relevant literature on the complications of medical use of collagen compounds. RESULTS: Two patients in whom collagen was injected formed firm submucosal deposits that interrupted the normal mucosal wave and produced significant dysphonia. Surgical removal of these deposits restored the mucosal wave and improved voice quality. Management of this unusual complication of human collagen injection in the vocal fold has not been reported previously. Other complications of collagen injection include hypersensitivity reactions to bovine collagen, local abscess formation at injection sites, and possibly induction of collagen vascular disease in some patients. CONCLUSIONS: Although collagen injections of the vocal fold rarely result in complications, physicians using collagen must be familiar with the types of complications that can occur. Proper diagnosis and prompt management of complications can result in good outcomes.     

A Model of the Perishable Inventory System With Reference to Consumer-Realized Product Expiration

A new model of the perishable inventory system is presented, which recognizes and incorporates the effects of consumer-realized product expiration. Such expiration has not been explicitly treated within the perishable inventory literature, and occurs when units are expired at the time of sale or expire within some short period of time subsequent to purchase. The model treats the age at which the vendor outdates units as a decision variable, and allows for analysis of the interaction between inventory ordering and outdate policy for a perishable item with random lifetime. As such, the model represents a synthesis of the fixed versus random lifetime perishable inventory literatures. Sensitivity analysis conducted with respect to the new model provides insight into the trade-offs between the costs of carrying, shortage, outdating, and consumer-realized product expiration.     

Postmodification of poly(9‐alkyl‐9H‐carbazole‐2,7‐diyl)s as a route to new main‐chain‐functionalized carbazole polymers

The postmodification of poly[9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P1 ) upon its reaction with N‐bromosuccinimide affords exclusive and full bromination of the 3,6‐positions of the carbazole repeat units to yield poly[3,6‐dibromo‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P2 ). Brominated polymer P2 can be used as a precursor for further functionalization at the 3,6‐positions with the desired functional group to afford other useful polymers. Polymer P2 has hence been reacted with copper(I) cyanide to afford poly[3,6‐dicyano‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P3 ). Full substitution of the bromide groups with nitrile‐functional groups has been achieved. The preparation and structural characterization of polymers P2 and P3 are presented together with studies on their electronic conjugation and photoluminescence properties. Cyclic voltammetry studies on polymer P3 indicate that the new polymer is easier to reduce (n‐dope) but more difficult to oxidize than its unsubstituted counterpart ( P1 ) as a result of the introduction of the electron‐withdrawing nitrile‐functional groups at the 3,6‐positions on the carbazole repeat units on the polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3336–3342, 2006     

Bis(amino acid) derivatives of 1,4-diamino-2-butyne that adopt a C2-symmetric turn conformation

1,4-Diamino-2-butyne was prepared from 1,4-dichloro-2-butyne via 1,4-diazido-2-butyne. Bis(amino acid) derivatives of 1,4-diamino-2-butyne having the general structure (Boc-Xxx-NHCH2C[triple bond])2 (Xxx = Ala, Phe and Met) were prepared and examined by 1H NMR spectroscopy. Using chemical shift, coupling constant and DMSO titration data it is found that these compounds adopt a C2-symmetric turn conformation featuring two intramolecular hydrogen bonds.     

Aromatic antimony compounds. Transition metal complexes of 2,5-dimethylstibacyclopentadienyl

Hydrostannation of 2,4-hexadiyne with dibutyltin dihydride gave 1,1-dibutyl-2,5-dimethylstannole, which was converted to 2,5-dimethylstibacymantrene and to bis(2,5-dimethylstibacyclopentadienyl)iron.